Ledlenser EX7 Hazardous Area Safety Torch | ODK
Working in a dark industrial area becomes much easier when your torch can be controlled without removing your safety gloves. The Ledlenser EX7 has a large magnetic switch that is easy to operate during inspections, maintenance work and emergency situations.
This torch is made for hazardous working areas where flammable gases, vapours or combustible dust may be present. It is suitable for Ex-Zone 0/20 environments, making it a practical choice for oil and gas facilities, industrial plants, storage sites and other controlled workplaces. Always check your site’s safety requirements before use.
The beam can be adjusted depending on the job. Use the wider light to see the area around you, or focus the beam when you need to inspect something farther away. The maximum setting provides 200 lumens and reaches up to 120 metres, while the lower setting gives you a longer runtime for extended shifts.
There is no charger to carry or wait for. The EX7 uses three replaceable AA batteries and can run for up to 45 hours on its lower setting. Its bright yellow body is easy to find inside a work bag or equipment box, and the included clips help keep it close when you need both hands free
Technical Details:
| Specification |
Details |
| Maximum light output |
200 lumens |
| Low light output |
60 lumens |
| Maximum beam distance |
Up to 120 metres |
| Low setting beam distance |
Up to 70 metres |
| Runtime at maximum output |
Up to 16 hours |
| Runtime at low output |
Up to 45 hours |
| LED colour temperature |
6000 - 8000 K |
| Colour rendering index |
CRI 65 |
| Battery type |
3 × AA 1.5V alkaline batteries |
| Batteries included |
Yes |
| Rechargeable |
No |
| Charging method |
Not applicable |
| Water and dust protection |
IP66 according to the Ledlenser UAE listing |
| Body material |
Polycarbonate |
| Length |
161 mm |
| Head diameter |
41 mm |
| Body diameter |
41 mm |
| Weight |
232 g including batteries |
| Operating temperature |
-20°C to +40°C |
| Hazardous-area rating |
Suitable for Ex-Zone 0/20 environments |
| Light settings |
Power and Low Power |
| Beam adjustment |
Advanced Focus System |
| Switch type |
Large magnetic switch with two off positions |
| Included accessories |
AA battery set, intelligent clip and belt clip |
| Product number |
500836 / LL500836 |
